DWM has been contracted to complete a full tear-down and rebuild of a cafe in California. The project included general handyman, plumbing, & electrical work. All work to be managed by DWM on-site Project Manager. Project includes clean up & disposal of all existing cafe equipment.
Remove the lighted wooden entrance pillars and repair/replace the damaged floor tiles.
Remove the railing around the café dining room and dispose of. Replace/Repair the floor tile as required.
Cabinets and countertops and any remaining accessories are removed by GC and disposed of. This includes the laminated countertop on the seating bar at the window If present at the cafe.
Remove the wood wall at the workroom door area is to be removed and discarded and replace with new smaller wall.
Remove 4 feet of sheetrock from back wall and side wall to expose existing services for back and side café cabinetry lines.
Trench floor for new services & rough-in services.
Remove the laminate shelving in the café workroom and repair any wall damage. New metal shelving will replace the removed laminate shelving.
Disconnect all equipment and secure lines appropriately. Include disconnect the service to the lighted entrance pillars.
Remove the existing recessed cans in the soffit over the front counter line.
Remove the existing Menu Board Track Lighting and replace with supplied LED track lighting.
Trim out of all electrical needs to include the new service to the coffee bar
Install 3 floor sinks.
Remove existing water filter system and install new water filter system board.
Sheetrock to be installed on back wall. Tape as appropriate with quick set materials.
Supply/install FRP from floor to top height of 36”
Install all necessary tile, cove, and grout using quick set materials in dining room and prep areas.
Paint the coffee bar & work room
Install the new Corian countertop on this frame.
New Café Cabinets to be set & Corian tops and sub tops to be set on all cabinetry.
Pastry Case and Beverage Cooler to be put into place in front line.
Install backsplash materials on back and side lines.
Install the new metal shelving over the 3 compartments sink and at the mop sink.