Construction & Renovation Project Overview
Location:
King of Prussia, PA
Length:
8 Weeks
Estimated Completion Date:
Completed: 09/24/2018
Scope:
DWM was contracted to complete an 8 week remodel of a health & wellness-focused educational facility. The project is to be completed in two phases to minimize disruption to operations. The scope includes general interior, painting, flooring, doors, cabinetry/millwork, turn-key clean up, and on-site project management. The project will focus on clinical areas, classrooms, lounges, cafe, and vestibules.
Scope Detail:
-
Put down protective plastic on all finished floors and furniture
-
Patch and sand all minor wall defects
-
Spot prime all repairs and stains
-
Apply two coats of Benjamin Moore Scuff-X in Satin Low- V.O.C. Paint on all walls
-
Apply two coats of Benjamin Moore 'UltraSpec' HP D.T.M. Semi-Gloss Paint on all door frames
-
Clean all work areas Daily and dispose of all debris off site
-
Perform initial moisture testing to be conducted prior to start of flooring installation
-
Work is to be completed in two phases
-
Existing flooring and cove base is to be Demo'ed in all areas
-
Apply "Ardex" feather finish to floor, ensuring a smooth and flat surface
-
Install Shaw carpet tiles and new cove base
-
Install Shaw L.V.T. and cove base
-
Install heavy duty carpet tile in front vestibule
-
Install transitions were required
-
Clean all work areas daily and dispose of all debris offsite
-
Build closet in the Northeast corner of Clinic with 36" door
-
Install partition wall between Clinic and Classroom
-
Classroom "B"
-
Build Storage closet the length of south wall with 36" door
-
Build (2) walls to create 'cubby' for partition door
-
Classroom "C"
-
Build Storage closet the length of the south wall with a 36" door
-
Faculty Room/ Practice Lab #6
-
Remove wall between Faculty Room and Practice lab #6 merging the rooms
-
Remove Door for Practice Lab #6 and fill in doorway
-
Frame out new walls as required
-
Apply 5/8" drywall to new wall
-
Tape joints and finish to a smooth finish
-
Install 36" solid core wood doors to match existing like for like
-
Adjust ceiling grids as necessary
-
Remove existing upper and lower cabinets in the Lunchroom
-
Put aside sink and faucet to be reused
-
Install (6) new upper and lower cabinets
-
Install new laminate counter top with backsplash and original faucet and sink
-
Remove existing laminate from top of front reception desk
-
Prepare surface to receive new laminate
-
Install New laminate on the reception desk
-
Clean work area and dispose of all debris off site
-
Remove all wood lockers on wall in Student Lounge
-
Make all necessary repairs to the wall to be paint ready
-
Install up to (3) Duplex outlets on wall that is receiving cafe bar
-
Install (6) new pendant lights in student lounge and hallway
-
Prime walls
-
After Student lounge is painted and new flooring is installed
-
Install 26'L X 42"H ABOVE FLOOR X 20"D long cafe style bar with 12 bar stools anchored to the concrete wall
-
Remove inner wooden entry doors from door frame
-
Remove all door hardware and save for reuse
-
Sand doors and fill any dents
-
Apply one coat of stain to match existing doors
-
Apply two coats of polyurethane
-
Hang doors in door frame
-
Install original hardware
-
Install speaker/s into the reception area connected into the music PA system
-
Clean work area and dispose of all debris off site
-
Remove existing accordion door and track
-
Install a new accordion door and track
.png)
